Predictive Maintenance of Old Grinding Machines Using Machine Learning Techniques
DOI:
https://doi.org/10.37385/jaets.v6i2.6417Keywords:
Predictive Maintenance System, Aging Vertical Grinding Machine, Vibration, Machine Learning, Fuzzy LogicAbstract
This study aims to develop a predictive maintenance system for an aging vertical grinding machine, operational since 1978, by integrating machine learning techniques, vibration analysis, and fuzzy logic. The research addresses the challenges of increased wear and unexpected failures in older machinery, which can lead to costly downtime and reduced operational efficiency. Vibration and temperature data were collected over 12 days using an MPU-9250 accelerometer, with conditions categorized as good, fair, and faulty. Various machine learning models, including logistic regression, k-nearest neighbors, support vector machines, decision trees, random forest, and Naive Bayes, were trained to classify bearing states. The random forest model achieved the highest accuracy of 94.59%, demonstrating its effectiveness in predicting machine failures. The results highlight the potential of combining multi-dimensional sensor data with advanced analytics to enable early fault detection, minimize downtime, and improve operational efficiency. This approach provides a cost-effective solution for maintaining aging machinery and contributes to both theoretical advancements in machine learning applications and practical improvements in industrial maintenance practices. The study’s findings offer scalable insights for industries reliant on legacy equipment, promoting sustainable manufacturing through optimized resource use and enhanced reliability.
Downloads
References
Abiodun, O. I., Omolara, A. E., Dada, K. V, Mohamed, N., & Arshad, H. (2018). State-of-the-Art in Artificial Neural Network Applications: A Survey. Heliyon, 4(11), e00938. https://doi.org/10.1016/j.heliyon.2018.e00938
Ahmer, M., Sandin, F., Marklund, P., Gustafsson, M., & Berglund, K. (2022). Failure Mode Classification for Condition-Based Maintenance in a Bearing Ring Grinding Machine. The International Journal of Advanced Manufacturing Technology, 122(3–4), 1479–1495. https://doi.org/10.1007/s00170-022-09930-6
Azeem, N., Yuan, X., Raza, H., & Urooj, I. (2019). Experimental Condition Monitoring for the Detection of Misaligned and Cracked Shafts by Order Analysis. Advances in Mechanical Engineering, 11(5). https://doi.org/10.1177/1687814019851307
Baban, M., B?ban, C. F., & Suteu, M. D. (2019). Maintenance Decision-Making Support for Textile Machines: A Knowledge-Based Approach Using Fuzzy Logic and Vibration Monitoring. Ieee Access, 7, 83504–83514. https://doi.org/10.1109/access.2019.2923791
Çal??kan, A., O’Brien, C. S., Panduru, K., Walsh, J. T., & Riordan, D. (2023). An Efficient Siamese Network and Transfer Learning-Based Predictive Maintenance System for More Sustainable Manufacturing. Sustainability, 15(12), 9272. https://doi.org/10.3390/su15129272
Cao, Y. (2023). Experimental Analysis and Machine Learning of Ground Vibrations Caused by an Elevated High-Speed Railway Based on Random Forest and Bayesian Optimization. Sustainability, 15(17), 12772. https://doi.org/10.3390/su151712772
Cardoso, D., & Ferreira, L. A. (2020). Application of Predictive Maintenance Concepts Using Artificial Intelligence Tools. Applied Sciences, 11(1), 18. https://doi.org/10.3390/app11010018
Carvalho, T. P., Soares, F., Vita, R., Francisco, R. d. P., Basto, J. P. T. V., & Alcalá, S. G. S. (2019). A Systematic Literature Review of Machine Learning Methods Applied to Predictive Maintenance. Computers & Industrial Engineering, 137, 106024. https://doi.org/10.1016/j.cie.2019.106024
Cazañas, R. D., Sobrino, D. R. D., Martínez, E. M. de la P., Kingshott, P., & Mudriková, A. (2018). Integrating Production and Maintenance Planning as an Element of Success at the Tactical Level: A Fuzzy Control Theory Approach. Research Papers Faculty of Materials Science and Technology Slovak University of Technology, 26(42), 109–117. https://doi.org/10.2478/rput-2018-0013
Deutsch, J., & He, D. (2018). Using Deep Learning-Based Approach to Predict Remaining Useful Life of Rotating Components. Ieee Transactions on Systems Man and Cybernetics Systems, 48(1), 11–20. https://doi.org/10.1109/tsmc.2017.2697842
Ding, C., Huang, W., Shen, C., Jiang, X., Zhu, Z., & Zhu, Z. (2023). Synchroextracting Frequency Synchronous Chirplet Transform for Fault Diagnosis of Rotating Machinery Under Varying Speed Conditions. Structural Health Monitoring, 23(3), 1403–1422. https://doi.org/10.1177/14759217231181308
Dogra, V. (2021). Nonlinear Dynamics and Vibration Analysis of Rotating Machinery. Mathematical Statistician and Engineering Applications, 70(1), 527–539. https://doi.org/10.17762/msea.v70i1.2506
Eddarhri, M. (2023). A Proposed Roadmap for Optimizing Predictive Maintenance of Industrial Equipment. International Journal of Advanced Computer Science and Applications, 14(11). https://doi.org/10.14569/ijacsa.2023.0141138
Glaeser, A., Selvaraj, V., Lee, S. Y., Hwang, Y., Lee, K., Lee, N., Lee, S., & Min, S. (2021). Applications of Deep Learning for Fault Detection in Industrial Cold Forging. International Journal of Production Research, 59(16), 4826–4835. https://doi.org/10.1080/00207543.2021.1891318
Goto, D. (2023). Observation and Prediction of Instability Due to RD Fluid Force in Rotating Machinery by Operational Modal Analysis. Phmap_conf, 4(1). https://doi.org/10.36001/phmap.2023.v4i1.3669
Hajnayeb, A. (2021). Cavitation Analysis in Centrifugal Pumps Based on Vibration Bispectrum and Transfer Learning. Shock and Vibration, 2021(1). https://doi.org/10.1155/2021/6988949
Hassan, I. U. (2024). An in-Depth Study of Vibration Sensors for Condition Monitoring. Sensors, 24(3), 740. https://doi.org/10.3390/s24030740
Ighravwe, D. E., & Oke, S. A. (2020). A Two-Stage Fuzzy Multi-Criteria Approach for Proactive Maintenance Strategy Selection for Manufacturing Systems. Sn Applied Sciences, 2(10). https://doi.org/10.1007/s42452-020-03484-6
Kamel, H. (2022). Artificial Intelligence for Predictive Maintenance. Journal of Physics Conference Series, 2299(1), 012001. https://doi.org/10.1088/1742-6596/2299/1/012001
Koene, I., Viitala, R., & Kuosmanen, P. (2019). Internet of Things Based Monitoring of Large Rotor Vibration With a Microelectromechanical Systems Accelerometer. Ieee Access, 7, 92210–92219. https://doi.org/10.1109/access.2019.2927793
Neog, S., & Das, K. (2023). Predictive Maintenance Using Machine Learning With the Support From Smart Sensors and Supply Chain Management Using Blockchain. Indian Journal of Science and Technology, 16(SP2), 70–75. https://doi.org/10.17485/ijst/v16isp2.8904
Neziri?, E., Isi?, S., & Karabegovi?, I. (2022). Vibration Quantity Share of Multiple Faults With Similar Frequency Spectrum Characteristics in Rotational Machinery. Periodica Polytechnica Mechanical Engineering, 66(3), 213–218. https://doi.org/10.3311/ppme.19117
Pundir, A. K. (2022). Machine Learning Based Predictive Maintenance Model. https://doi.org/10.46254/in02.20220528
Rahman, A., Hoque, Md. E., Rashid, F., Alam, F., & Ahmed, M. M. (2022). Health Condition Monitoring and Control of Vibrations of a Rotating System Through Vibration Analysis. Journal of Sensors, 2022, 1–12. https://doi.org/10.1155/2022/4281596
Raja, H. A., Kudelina, K., Asad, B., Vaimann, T., Kallaste, A., Rassõlkin, A., & Khang, H. V. (2022). Signal Spectrum-Based Machine Learning Approach for Fault Prediction and Maintenance of Electrical Machines. Energies, 15(24), 9507. https://doi.org/10.3390/en15249507
Romanssini, M., Aguirre, P. C. C. de, Severo, L. C., & Girardi, A. (2023a). A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery. Eng—Advances in Engineering, 4(3), 1797–1817. https://doi.org/10.3390/eng4030102
Romanssini, M., Aguirre, P. C. C. de, Severo, L. C., & Girardi, A. (2023b). A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery. Eng—Advances in Engineering, 4(3), 1797–1817. https://doi.org/10.3390/eng4030102
Salimi, A., Suba??, M., Buldu, L., & Karata?, Ç. (2012). Prediction of Flow Length in Injection Molding for Engineering Plastics by Fuzzy Logic Under Different Processing Conditions. Iranian Polymer Journal, 22(1), 33–41. https://doi.org/10.1007/s13726-012-0103-5
Silvestrin, L. P., Hoogendoorn, M., & Koole, G. (2019). A Comparative Study of State-of-the-Art Machine Learning Algorithms for Predictive Maintenance. https://doi.org/10.1109/ssci44817.2019.9003044
Tang, M., Liao, Y., Luo, F., & Li, X. (2022). A Novel Method for Fault Diagnosis of Rotating Machinery. Entropy, 24(5), 681. https://doi.org/10.3390/e24050681
Tiddens, W. W., Braaksma, J., & Tinga, T. (2020). Exploring Predictive Maintenance Applications in Industry. Journal of Quality in Maintenance Engineering, 28(1), 68–85. https://doi.org/10.1108/jqme-05-2020-0029
Wang, Y., & Zhao, Y. (2022). Multi-Scale Remaining Useful Life Prediction Using Long Short-Term Memory. Sustainability, 14(23), 15667. https://doi.org/10.3390/su142315667
Xu, M., Han, Y., Sun, X., Shao, Y., Gu, F., & Ball, A. (2022a). Vibration Characteristics and Condition Monitoring of Internal Radial Clearance Within a Ball Bearing in a Gear-Shaft-Bearing System. Mechanical Systems and Signal Processing, 165, 108280. https://doi.org/10.1016/j.ymssp.2021.108280
Xu, M., Han, Y., Sun, X., Shao, Y., Gu, F., & Ball, A. (2022b). Vibration Characteristics and Condition Monitoring of Internal Radial Clearance Within a Ball Bearing in a Gear-Shaft-Bearing System. Mechanical Systems and Signal Processing, 165, 108280. https://doi.org/10.1016/j.ymssp.2021.108280
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020). Deep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review. Ieee Access, 8, 29857–29881. https://doi.org/10.1109/access.2020.2972859
Zhou, S., Shi, J., Luo, Y., Shen, C., & Zhu, Z. (2022). Fault Severity Assessment for Rotating Machinery via Improved Lempel–Ziv Complexity Based on Variable-Step Multiscale Analysis and Equiprobable Space Partitioning. Measurement Science and Technology, 33(5), 055018. https://doi.org/10.1088/1361-6501/ac50e8
CITEDNESS IN SCOPUS
CITEDNESS IN WOS
